LevelOne GTL-2691 - Manual (Page 1584)

C HAPTER 50 | Multicast Routing Commands
PIM Multicast Routing
– 1584 –
E XAMPLE
Console#show ipv6 pim interface vlan 1
PIM is enabled.
VLAN 1 is up.
PIM Mode : Dense Mode
IPv6 Address : None
Hello Interval : 30 sec
Hello HoldTime : 105 sec
Triggered Hello Delay : 5 sec
Join/Prune Holdtime : 210 sec
Lan Prune Delay : Disabled
Propagation Delay : 500 ms
Override Interval : 2500 ms
Graft Retry Interval : 3 sec
Max Graft Retries : 3
State Refresh Ori Int : 60 sec
Console#
show ipv6 pim
neighbor
This command displays information about PIM neighbors.
S YNTAX
show ipv6 pim neighbor [interface vlan vlan-id]
vlan-id - VLAN ID (Range: 1-4093)
D EFAULT S ETTING
Displays information for all known PIM neighbors.
C OMMAND M ODE
Normal Exec, Privileged Exec
E XAMPLE
Console#show ipv6 pim neighbor
Neighbor Address VLAN Interface Uptime Expire DR
--------------------------------------- -------------- -------- -------- ---
FF80::0101 VLAN 1 00:01:23 00:01:23 YES
FF80::0202 VLAN 2 1d 11h Never
Console#
Table 235: show ipv6 pim neighbor - display description
Field Description
Neighbor Address
IP address of the next-hop router.
VLAN Interface
Interface number that is attached to this neighbor.
Uptime
The duration this entry has been active.
Expiration Time
The time before this entry will be removed.