LevelOne GTL-2691 - Manual (Page 314)

C HAPTER 13 | Security Measures
AAA Authorization and Accounting
– 314 –
■
Set Key – Mark this box to set or modify the encryption key.
■
Authentication Key – Encryption key used to authenticate logon
access for client. Do not use blank spaces in the string. (Maximum
length: 48 characters)
■
Confirm Authentication Key – Re-type the string entered in the
previous field to ensure no errors were made. The switch will not
change the encryption key if these two fields do not match.
◆ TACACS+
■
Global – Provides globally applicable TACACS+ settings.
■
Server Index – Specifies the index number of the server to be
configured. The switch currently supports only one TACACS+ server.
■
Server IP Address – Address of the TACACS+ server.
(A Server Index entry must be selected to display this item.)
■
Authentication Server TCP Port – Network (TCP) port of
TACACS+ server used for authentication messages.
(Range: 1-65535; Default: 49)
■
Authentication Timeout – The number of seconds the switch
waits for a reply from the TACACS+ server before it resends the
request. (Range: 1-540; Default: 5)
■
Authentication Retries – Number of times the switch tries to
authenticate logon access via the authentication server.
(Range: 1-30; Default: 2)
■
Set Key – Mark this box to set or modify the encryption key.
■
Authentication Key – Encryption key used to authenticate logon
access for client. Do not use blank spaces in the string. (Maximum
length: 48 characters)
■
Confirm Authentication Key – Re-type the string entered in the
previous field to ensure no errors were made. The switch will not
change the encryption key if these two fields do not match.
Configure Group
◆ Server Type – Select RADIUS or TACACS+ server.
◆ Group Name - Defines a name for the RADIUS or TACACS+ server
group. (Range: 1-64 characters)
◆ Sequence at Priority - Specifies the RADIUS server and sequence to
use for the group. (Range: 1-5)