Network-access link-detection link- down, Network-access link-detection link- up, Network-access link-detection link-down – LevelOne GTL-2691 User Manual
Page 933: Network-access link-detection link-up, Network-access link-detection, Link-down, Link-up
C
HAPTER
29
| General Security Measures
Network Access (MAC Address Authentication)
– 933 –
network-access
link-detection link-
down
Use this command to detect link-down events. When detected, the switch
can shut down the port, send an SNMP trap, or both. Use the no form of
this command to disable this feature.
S
YNTAX
network-access link-detection link-down
action [shutdown | trap | trap-and-shutdown]
no network-access link-detection
action - Response to take when port security is violated.
shutdown - Disable port only.
trap - Issue SNMP trap message only.
trap-and-shutdown - Issue SNMP trap message and disable
the port.
D
EFAULT
S
ETTING
Disabled
C
OMMAND
M
ODE
Interface Configuration
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#network-access link-detection link-down action trap
Console(config-if)#
network-access
link-detection link-
up
Use this command to detect link-up events. When detected, the switch can
shut down the port, send an SNMP trap, or both. Use the no form of this
command to disable this feature.
S
YNTAX
network-access link-detection link-up
action [shutdown | trap | trap-and-shutdown]
no network-access link-detection
action - Response to take when port security is violated.
shutdown - Disable port only.
trap - Issue SNMP trap message only.
trap-and-shutdown - Issue SNMP trap message and disable
the port.
D
EFAULT
S
ETTING
Disabled
C
OMMAND
M
ODE
Interface Configuration