LevelOne GTL-2691 - Manual (Page 1213)

C HAPTER 42 | Multicast Filtering Commands
IGMP Filtering and Throttling
– 1213 –
E XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#ip igmp max-groups action replace
Console(config-if)#
ip igmp query-drop This command drops any received IGMP query packets. Use the no form to
restore the default setting.
S YNTAX
[no] ip igmp query-drop
D EFAULT S ETTING
Disabled
C OMMAND M ODE
Interface Configuration (Ethernet)
C OMMAND U SAGE
This command can be used to drop any query packets received on the
specified interface. If this switch is acting as a Querier, this prevents it from
being affected by messages received from another Querier.
E XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#ip igmp query-drop
Console(config-if)#
ip multicast-data-
drop
This command drops all multicast data packets
S YNTAX
[no] ip multicast-data-drop
D EFAULT S ETTING
Disabled
C OMMAND M ODE
Interface Configuration (Ethernet)
C OMMAND U SAGE
This command can be used to stop multicast services from being forwarded
to users attached to the downstream port (i.e., the interfaces specified by
this command).