LevelOne GTL-2691 - Manual (Page 818)

C HAPTER 24 | System Management Commands
Time Range
– 818 –
time-range This command specifies the name of a time range, and enters time range
configuration mode. Use the no form to remove a previously specified time
range.
S YNTAX
[no] time-range name
name - Name of the time range. (Range: 1-30 characters)
D EFAULT S ETTING
None
C OMMAND M ODE
Global Configuration
C OMMAND U SAGE
This command sets a time range for use by other functions, such as Access
Control Lists.
E XAMPLE
Console(config)#time-range r&d
Console(config-time-range)#
R ELATED C OMMANDS
Access Control Lists (973)
absolute This command sets the time range for the execution of a command. Use
the no form to remove a previously specified time.
S YNTAX
absolute start hour minute day month year
[end hour minutes day month year]
absolute end hour minutes day month year
no absolute
hour - Hour in 24-hour format. (Range: 0-23)
minute - Minute. (Range: 0-59)
day - Day of month. (Range: 1-31)
month - january | february | march | april | may | june | july |
august | september | october | november | december
year - Year (4-digit). (Range: 2009-2109)
D EFAULT S ETTING
None