LevelOne GTL-2691 - Manual (Page 1113)

C HAPTER 39 | VLAN Commands
Editing VLAN Groups
– 1113 –
E DITING VLAN G ROUPS
vlan database This command enters VLAN database mode. All commands in this mode
will take effect immediately.
D EFAULT S ETTING
None
C OMMAND M ODE
Global Configuration
C OMMAND U SAGE
◆ Use the VLAN database command mode to add, change, and delete
VLANs. After finishing configuration changes, you can display the VLAN
settings by entering the show vlan command.
◆ Use the interface vlan command mode to define the port membership
mode and add or remove ports from a VLAN. The results of these
commands are written to the running-configuration file, and you can
display this file by entering the show running-config command.
E XAMPLE
Console(config)#vlan database
Console(config-vlan)#
R ELATED C OMMANDS
show vlan (1122)
Table 121: Commands for Editing VLAN Groups
Command Function Mode
vlan database Enters VLAN database mode to add, change, and
delete VLANs
GC
vlan Configures a VLAN, including VID, name and state VC