LevelOne GTL-2691 - Manual (Page 1200)

C HAPTER 42 | Multicast Filtering Commands
IGMP Snooping
– 1200 –
downstream hosts, all receivers build an IGMP report for the multicast
groups they have joined.
◆ This command applies when the switch is serving as the querier
( page 1188 ), or as a proxy host when IGMP snooping proxy reporting is
enabled ( page 1188 ).
E XAMPLE
Console(config)#ip igmp snooping vlan 1 query-interval 150
Console(config)#
ip igmp snooping
vlan query-resp-
intvl
This command configures the maximum time the system waits for a
response to general queries. Use the no form to restore the default.
S YNTAX
ip igmp snooping vlan vlan-id query-resp-intvl interval
no ip igmp snooping vlan vlan-id query-resp-intvl
vlan-id - VLAN ID (Range: 1-4093)
interval - The maximum time the system waits for a response to
general queries. (Range: 10-31744 tenths of a second)
D EFAULT S ETTING
100 (10 seconds)
C OMMAND M ODE
Global Configuration
C OMMAND U SAGE
◆ This command applies when the switch is serving as the querier
( page 1188 ), or as a proxy host when IGMP snooping proxy reporting is
enabled ( page 1188 ).
E XAMPLE
Console(config)#ip igmp snooping vlan 1 query-resp-intvl 20
Console(config)#