LevelOne GTL-2691 - Manual (Page 1137)

C HAPTER 39 | VLAN Commands
Configuring Private VLANs
– 1137 –
private vlan
association
Use this command to associate a primary VLAN with a secondary (i.e.,
community) VLAN. Use the no form to remove all associations for the
specified primary VLAN.
S YNTAX
private-vlan primary-vlan-id association {secondary-vlan-id |
add secondary-vlan-id | remove secondary-vlan-id}
no private-vlan primary-vlan-id association
primary-vlan-id - ID of primary VLAN. (Range: 1-4093).
secondary-vlan-id - ID of secondary (i.e, community) VLAN.
(Range: 1-4093).
D EFAULT S ETTING
None
C OMMAND M ODE
VLAN Configuration
C OMMAND U SAGE
Secondary VLANs provide security for group members. The associated
primary VLAN provides a common interface for access to other network
resources within the primary VLAN (e.g., servers configured with
promiscuous ports) and to resources outside of the primary VLAN (via
promiscuous ports).
E XAMPLE
Console(config-vlan)#private-vlan 2 association 3
Console(config)#
switchport mode
private-vlan
Use this command to set the private VLAN mode for an interface. Use the
no form to restore the default setting.
S YNTAX
switchport mode private-vlan {host | promiscuous}
no switchport mode private-vlan
host – This port type can subsequently be assigned to a community
VLAN.
promiscuous – This port type can communicate with all other
promiscuous ports in the same primary VLAN, as well as with all the
ports in the associated secondary VLANs.
D EFAULT S ETTING
Normal VLAN