LevelOne GTL-2691 - Manual (Page 820)

C HAPTER 24 | System Management Commands
Switch Clustering
– 820 –
E XAMPLE
This example configures a time range for the periodic occurrence of an
event.
Console(config)#time-range sales
Console(config-time-range)#periodic daily 1 1 to 2 1
Console(config-time-range)#
show time-range This command shows configured time ranges.
S YNTAX
show time-range [name]
name - Name of the time range. (Range: 1-30 characters)
D EFAULT S ETTING
None
C OMMAND M ODE
Privileged Exec
E XAMPLE
Console#show time-range r&d
Time-range r&d:
absolute start 01:01 01 April 2009
periodic Daily 01:01 to Daily 02:01
periodic Daily 02:01 to Daily 03:01
Console#
S WITCH C LUSTERING
Switch Clustering is a method of grouping switches together to enable
centralized management through a single unit. Switches that support
clustering can be grouped together regardless of physical location or switch
type, as long as they are connected to the same local network.
Table 59: Switch Cluster Commands
Command Function Mode
cluster Configures clustering on the switch GC
cluster commander Configures the switch as a cluster Commander GC
cluster ip-pool Sets the cluster IP address pool for Members GC
cluster member Sets Candidate switches as cluster members GC
rcommand Provides configuration access to Member switches GC
show cluster Displays the switch clustering status PE