LevelOne GTL-2691 - Manual (Page 1524)

C HAPTER 49 | IP Routing Commands
Open Shortest Path First (OSPFv3)
– 1524 –
default-metric This command sets the default metric for external routes imported from
other protocols. Use the no form to remove the default metric for the
supported protocol types.
S YNTAX
default-metric metric-value
no default-metric
metric-value – Metric assigned to all external routes imported from
other protocols. (Range: 0-16777214)
C OMMAND M ODE
Router Configuration
D EFAULT S ETTING
20
C OMMAND U SAGE
◆ The default metric must be used to resolve the problem of
redistributing external routes from other protocols that use
incompatible metrics.
◆ This command does not override the metric value set by the
redistribute command. When a metric value has not been configured by
the redistribute command, the default-metric command sets the
metric value to be used for all imported external routes.
E XAMPLE
Console(config-router)#default-metric 100
Console(config-router)#
R ELATED C OMMANDS
redistribute (1524)
redistribute This command redistributes external routing information from other
routing protocols and static routes into an autonomous system. Use the no
form to disable this feature or to restore the default settings.
S YNTAX
redistribute {connected | static} [metric metric-value] [metric-
type type-value]
no redistribute {connected | rip | static} [metric] [metric-type]
connected - Imports all currently connected entries.
static - IPv6 static routes will be imported into this Autonomous
System.
metric-value - Metric assigned to all external routes for the
specified protocol. (Range: 0-16777214: Default: 20)