Lldp dot1-tlv proto- vid, Lldp dot1-tlv pvid, Lldp dot1-tlv proto-vid – LevelOne GTL-2691 User Manual
Page 1295
C
HAPTER
43
| LLDP Commands
– 1295 –
lldp dot1-tlv proto-
vid
This command configures an LLDP-enabled port to advertise port related
VLAN information. Use the no form to disable this feature.
S
YNTAX
[no] lldp dot1-tlv proto-vid
D
EFAULT
S
ETTING
Enabled
C
OMMAND
M
ODE
Interface Configuration (Ethernet, Port Channel)
C
OMMAND
U
SAGE
This option advertises the port-based protocol VLANs configured on this
interface (see
"Configuring Protocol-based VLANs" on page 1140
).
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#no lldp dot1-tlv proto-vid
Console(config-if)#
lldp dot1-tlv pvid
This command configures an LLDP-enabled port to advertise its default
VLAN ID. Use the no form to disable this feature.
S
YNTAX
[no] lldp dot1-tlv pvid
D
EFAULT
S
ETTING
Enabled
C
OMMAND
M
ODE
Interface Configuration (Ethernet, Port Channel)
C
OMMAND
U
SAGE
The port’s default VLAN identifier (PVID) indicates the VLAN with which
untagged or priority-tagged frames are associated (see the
command).
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#no lldp dot1-tlv pvid
Console(config-if)#