LevelOne GTL-2691 User Manual
Page 188
C
HAPTER
5
| Interface Configuration
Trunk Configuration
– 188 –
■
Source and Destination IP Address: All traffic with the same
source and destination IP address is output on the same link in a
trunk. This mode works best for switch-to-router trunk links where
traffic through the switch is received from and destined for many
different hosts.
■
Source and Destination MAC Address: All traffic with the same
source and destination MAC address is output on the same link in a
trunk. This mode works best for switch-to-switch trunk links where
traffic through the switch is received from and destined for many
different hosts.
■
Source IP Address: All traffic with the same source IP address is
output on the same link in a trunk. This mode works best for
switch-to-router or switch-to-server trunk links where traffic
through the switch is received from many different hosts.
■
Source MAC Address: All traffic with the same source MAC
address is output on the same link in a trunk. This mode works best
for switch-to-switch trunk links where traffic through the switch is
received from many different hosts.
P
ARAMETERS
These parameters are displayed for the load balance mode:
◆
Destination IP Address - Load balancing based on destination IP
address.
◆
Destination MAC Address - Load balancing based on destination MAC
address.
◆
Source and Destination IP Address - Load balancing based on
source and destination IP address.
◆
Source and Destination MAC Address - Load balancing based on
source and destination MAC address.
◆
Source IP Address - Load balancing based on source IP address.
◆
Source MAC Address - Load balancing based on source MAC address.
W
EB
I
NTERFACE
To display the load-distribution method used by ports in aggregated links:
1.
Click Interface, Trunk, Load Balance.
2.
Select the required method from the Load Balance Mode list.
3.
Click Apply.