LevelOne GTL-2691 - Manual (Page 925)

C HAPTER 29 | General Security Measures
Port Security
– 925 –
show port security This command displays port security status and the secure address count.
S YNTAX
show port security [interface interface]
interface - Specifies a port interface.
ethernet unit/port
unit - This is unit 1.
port - Port number. (Range: 1-26)
C OMMAND M ODE
Privileged Exec
E XAMPLE
This example shows the port security settings and number of secure
addresses for all ports.
Console#show port security
Global Port Security Parameters
Secure MAC Aging Mode : Disabled
Port Security Port Summary
Port Port Security Port Status Intrusion Action MaxMacCnt CurrMacCnt
--------------------------------------------------------------------------
Eth 1/ 1 Disabled Secure/Down None 0 2
Eth 1/ 2 Enabled Secure/Up None 10 0
Eth 1/ 3 Disabled Secure/Down None 0 0
Eth 1/ 4 Disabled Secure/Down None 0 0
Eth 1/ 5 Disabled Secure/Down None 0 0
Eth 1/ 6 Disabled Secure/Down None 0 0
Eth 1/ 7 Disabled Secure/Down None 0 0
Eth 1/ 8 Disabled Secure/Down None 0 0
Eth 1/ 9 Disabled Secure/Down None 0 0
Eth 1/10 Disabled Secure/Down None 0 0
Eth 1/11 Disabled Secure/Down None 0 0
Eth 1/12 Disabled Secure/Down None 0 0
.
.
.
Table 85: show port security - display description
Field Description
Port Security The configured status (enabled or disabled).
Port Status The operational status:
◆ Secure/Down – Port security is disabled.
◆ Secure/Up – Port security is enabled.
◆ Shutdown – Port is shut down due to a response to a port security
violation.
Intrusion Action The configured intrusion response.
MaxMacCnt The maximum number of addresses which can be stored in the address
table for this interface (either dynamic or static).
CurrMacCnt The current number of secure entries in the address table.