LevelOne GTL-2691 User Manual
Page 1508
C
HAPTER
49
| IP Routing Commands
Open Shortest Path First (OSPFv2)
– 1508 –
External Route Tag: 0
Console#
The following shows output when using the network keyword.
Console#show ip ospf database network
OSPF Router with ID (0.0.0.0) (Process ID 1)
Net Link States (Area 0.0.0.0)
LS Age: 0
Options: 0x2 (*|-|-|-|-|-|E|-)
LS Type: network-LSA
Link State ID: 192.168.0.2 (address of Designated Router)
Advertising Router: 192.168.0.2
LS Seq Number: 80000005
Checksum: 0x9413
Length: 32
Network Mask: /24
Attached Router: 192.168.0.2
Attached Router: 192.168.0.3
.
.
.
Table 209: show ip ospf database external - display description
Field
Description
OSPF Router ID Router ID
LS Age
Age of LSA (in seconds)
Options
Optional capabilities associated with the LSA
LS Type
AS External Links - LSA describes routes to destinations outside the AS
(including default external routes for the AS)
Link State ID
IP network number (External Network Number)
Advertising
Router
Advertising router ID
LS Sequence
Number
Sequence number of LSA (used to detect older duplicate LSAs)
Checksum
Checksum of the complete contents of the LSA
Length
The length of the LSA in bytes
Network Mask
Address mask for the network
Metric Type
Type 1 or Type 2 external metric (see the
command)
TOS
Type of Service – This router only supports TOS 0 (or normal service)
Metric
Cost of the link
Forward
Address
Next hop address. If this field is set to 0.0.0.0, data is forwarded to the
originator of the advertisement.
External Route
Tag
Optional tag if defined (see the
command)