LevelOne GTL-2691 User Manual

Page 446

HAPTER

| Basic Administration Protocols

Simple Network Management Protocol

– 446 –

ARAMETERS

These parameters are displayed:

SNMP Version 1

◆

IP Address – IP address of a new management station to receive

notification message (i.e., the targeted recipient).

◆

Version – Specifies whether to send notifications as SNMP v1, v2c, or

v3 traps. (Default: v1)

◆

Community String – Specifies a valid community string for the new

trap manager entry. (Range: 1-32 characters, case sensitive)

Although you can set this string in the Configure Trap – Add page, we

recommend defining it in the Configure User – Add Community page.

◆

UDP Port – Specifies the UDP port number used by the trap manager.

(Default: 162)

SNMP Version 2c

◆

IP Address – IP address of a new management station to receive

notification message (i.e., the targeted recipient).

◆

Version – Specifies whether to send notifications as SNMP v1, v2c, or

v3 traps.

◆

Notification Type

■

Traps – Notifications are sent as trap messages.

■

Inform – Notifications are sent as inform messages. Note that this

option is only available for version 2c and 3 hosts. (Default: traps

are used)

■

Timeout – The number of seconds to wait for an

acknowledgment before resending an inform message.

(Range: 0-2147483647 centiseconds; Default: 1500

centiseconds)

■

Retry times – The maximum number of times to resend an

inform message if the recipient does not acknowledge receipt.

(Range: 0-255; Default: 3)

◆