LevelOne GTL-2691 - Manual (Page 151)

C HAPTER 4 | Basic Management Tasks
Console Port Settings
– 151 –
◆ Minutes (0-59) – The number of minutes before/after UTC.
W EB I NTERFACE
To set your local time zone:
1. Click System, then Time.
2. Select Configure Time Zone from the Action list.
3. Set the offset for your time zone relative to the UTC in hours and
minutes.
4. Click Apply.
Figure 20: Setting the Time Zone
C ONSOLE P ORT S ETTINGS
Use the System > Console menu to configure connection parameters for
the switch’s console port. You can access the onboard configuration
program by attaching a VT100 compatible device to the switch’s serial
console port. Management access through the console port is controlled by
various parameters, including a password (only configurable through the
CLI), time outs, and basic communication settings. Note that these
parameters can be configured via the web or CLI interface.
CLI R EFERENCES
◆ "Line" on page 788
P ARAMETERS
The following parameters are displayed:
◆ Login Timeout – Sets the interval that the system waits for a user to
log into the CLI. If a login attempt is not detected within the timeout
interval, the connection is terminated for the session.
(Range: 10-300 seconds; Default: 300 seconds)