LevelOne GTL-2691 - Manual (Page 606)

C HAPTER 17 | IP Services
Dynamic Host Configuration Protocol
– 606 –
◆ End IP Address – The last address in a range that the DHCP server
should not assign to DHCP clients.
N OTE :
Be sure you exclude the address for this switch and other key
network devices.
W EB I NTERFACE
To configure IP addresses excluded for DHCP clients:
1. Click IP Service, DHCP, Server.
2. Select Configure Excluded Addresses from the Step list.
3. Select Add from the Action list.
4. Enter a single address or an address range.
5. Click Apply.
Figure 365: Configuring Excluded Addresses on the DHCP Server
To show the IP addresses excluded for DHCP clients:
1.
Click IP Service, DHCP, Server.
2. Select Configure Excluded Addresses from the Step list.
3.
Select Show from the Action list.
Figure 366: Showing Excluded Addresses on the DHCP Server