LevelOne GTL-2691 - Manual (Page 1088)

C HAPTER 37 | Spanning Tree Commands
– 1088 –
This example shows a brief summary of global and interface setting for the
spanning tree.
Console#show spanning-tree brief
Spanning Tree Mode : RSTP
Spanning Tree Enabled/Disabled : Enabled
Designated Root : 32768.0000E89382A0
Current Root Port : 0
Current Root Cost : 0
Interface Pri Designated Designated Oper STP Role State Oper
Bridge ID Port ID Cost Status Edge
--------- --- --------------------- ---------- -------- ------ ---- ----- ---
Eth 1/ 1 128 32768.0000E89382A0 128.1 100000 EN DESG FWD No
Eth 1/ 2 128 32768.0000E89382A0 128.2 10000 EN DISB BLK No
Eth 1/ 3 128 32768.0000E89382A0 128.3 10000 EN DISB BLK No
Eth 1/ 4 128 32768.0000E89382A0 128.4 10000 EN DISB BLK No
Eth 1/ 5 128 32768.0000E89382A0 128.5 10000 EN DISB BLK No
.
.
.
show spanning-tree
mst configuration
This command shows the configuration of the multiple spanning tree.
C OMMAND M ODE
Privileged Exec
E XAMPLE
Console#show spanning-tree mst configuration
Mstp Configuration Information
--------------------------------------------------------------
Configuration Name : R&D
Revision Level :0
Instance VLANs
--------------------------------------------------------------
0 1-4093
Console#