LevelOne GTL-2691 - Manual (Page 1010)

C HAPTER 31 | Interface Commands
Interface Configuration
– 1010 –
show interfaces
status
This command displays the status for an interface.
S YNTAX
show interfaces status [interface]
interface
ethernet unit/port
unit - Stack unit. (Range: 1-8)
port - Port number. (Range: 1-26)
port-channel channel-id (Range: 1-32)
vlan vlan-id (Range: 1-4093)
D EFAULT S ETTING
Shows the status for all interfaces.
C OMMAND M ODE
Normal Exec, Privileged Exec
C OMMAND U SAGE
If no interface is specified, information on all interfaces is displayed. For a
description of the items displayed by this command, see "Displaying
Connection Status" on page 165 .
E XAMPLE
Console#show interfaces status ethernet 1/21
Basic Information:
Port Type : 1000BASE-T
MAC Address : 00-00-E8-93-82-A1
Configuration:
Name :
Port Admin : Up
Speed-duplex : Auto
Capabilities : 10half, 10full, 100half, 100full, 1000full
Broadcast Storm : Enabled
Broadcast Storm Limit : 500 packets/second
Multicast Storm : Disabled
Multicast Storm Limit : 262143 packets/second
Unknown Unicast Storm : Disabled
Unknown Unicast Storm Limit : 262143 packets/second
Flow Control : Disabled
VLAN Trunking : Disabled
LACP : Disabled
MAC-Learning : Yes
Media Type : Copper forced
MTU : 1518
Current Status:
Link Status : Up
Port Operation Status : Up
Operation Speed-duplex : 100full
Flow Control Type : None
Max Frame Size : 1518 bytes (1522 bytes for tagged frames)
Console#