LevelOne GTL-2691 - Manual (Page 1049)

C HAPTER 35 | Automatic Traffic Control Commands
Threshold Commands
– 1049 –
auto-traffic-control
auto-control-release
This command automatically releases a control response of rate-limiting
after the time specified in the auto-traffic-control release-timer command
has expired.
S YNTAX
auto-traffic-control {broadcast | multicast}
auto-control-release
broadcast - Specifies automatic storm control for broadcast traffic.
multicast - Specifies automatic storm control for multicast traffic.
C OMMAND M ODE
Interface Configuration (Ethernet)
C OMMAND U SAGE
◆ This command can be used to automatically stop a control response of
rate-limiting after the specified action has been triggered and the
release timer has expired.
◆ To release a control response which has shut down a port after the
specified action has been triggered and the release timer has expired,
use the auto-traffic-control control-release command.
E XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#auto-traffic-control broadcast auto-control-release
Console(config-if)#
auto-traffic-control
control-release
This command manually releases a control response.
S YNTAX
auto-traffic-control {broadcast | multicast} control-release
broadcast - Specifies automatic storm control for broadcast traffic.
multicast - Specifies automatic storm control for multicast traffic.
C OMMAND M ODE
Privileged Exec
C OMMAND U SAGE
This command can be used to manually stop a control response of rate-
limiting or port shutdown any time after the specified action has been
triggered.
E XAMPLE
Console#auto-traffic-control broadcast control-release interface ethernet 1/1
Console#