LevelOne GTL-2691 - Manual (Page 164)

C HAPTER 5 | Interface Configuration
Port Configuration
– 164 –
◆ Speed/Duplex – Allows you to manually set the port speed and
duplex mode. (i.e., with auto-negotiation disabled)
◆ Flow Control – Allows automatic or manual selection of flow control.
◆ MTU Size – The maximum transfer unit (MTU) allowed for layer 2
packets crossing a Gigabit or 10 Gigabit Ethernet port or trunk.
(Range: 1500-9216 bytes; Default: 1518 bytes)
W EB I NTERFACE
To configure port connection parameters:
1. Click Interface, Port, General.
2. Select Configure by Port List from the Action List.
3. Modify the required interface settings.
4. Click Apply.
Figure 30: Configuring Connections by Port List
C ONFIGURING BY
P ORT R ANGE
Use the Interface > Port > General (Configure by Port Range) page to
enable/disable an interface, set auto-negotiation and the interface
capabilities to advertise, or manually fix the speed, duplex mode, flow
control, or MTU size.
For more information on command usage and a description of the
parameters, refer to "Configuring by Port List" on page 161 .
CLI R EFERENCES
◆ "Interface Commands" on page 997