LevelOne GTL-2691 User Manual
Page 1012
C
HAPTER
31
| Interface Commands
Interface Configuration
– 1012 –
Table 100: show interfaces switchport - display description
Field
Description
Broadcast
Threshold
Shows if broadcast storm suppression is enabled or disabled; if enabled
it also shows the threshold level (
).
Multicast
Threshold
Shows if multicast storm suppression is enabled or disabled; if enabled it
also shows the threshold level (
).
Unknown Unicast
Threshold
Shows if unknown unicast storm suppression is enabled or disabled; if
enabled it also shows the threshold level (
LACP Status
Shows if Link Aggregation Control Protocol has been enabled or disabled
).
Ingress/Egress
Rate Limit
Shows if rate limiting is enabled, and the current rate limit (
).
VLAN Membership
Mode
Indicates membership mode as Trunk or Hybrid (
).
Ingress Rule
Shows if ingress filtering is enabled or disabled (
Acceptable Frame
Type
Shows if acceptable VLAN frames include all types or tagged frames only
).
Native VLAN
Indicates the default Port VLAN ID (
).
Priority for
Untagged Traffic
Indicates the default priority for untagged frames (
GVRP Status
Shows if GARP VLAN Registration Protocol is enabled or disabled
).
Allowed VLAN
Shows the VLANs this interface has joined, where “(u)” indicates
untagged and “(t)” indicates tagged (
).
Forbidden VLAN
Shows the VLANs this interface can not dynamically join via GVRP
).
Private-VLAN
Mode
Shows the private VLAN mode as host, promiscuous, or none (
).
Private VLAN host-
association
Shows the secondary (or community) VLAN with which this port is
associated (
).
Private VLAN
mapping
Shows the primary VLAN mapping for a promiscuous port (
).
802.1Q-tunnel
Status
Shows if 802.1Q tunnel is enabled on this interface (
802.1Q-tunnel
Mode
Shows the tunnel mode as Normal, 802.1Q Tunnel or 802.1Q Tunnel
Uplink (
802.1Q-tunnel
TPID
Shows the Tag Protocol Identifier used for learning and switching packets
).