LevelOne GTL-2691 - Manual (Page 597)

C HAPTER 17 | IP Services
Domain Name Service
– 597 –
◆ If there is no domain list, the default domain name is used (see
"Configuring General DNS Service Parameters" on page 595 ). If there is
a domain list, the system will search it for a corresponding entry. If
none is found, it will use the default domain name.
◆ When an incomplete host name is received by the DNS service on this
switch and a domain name list has been specified, the switch will work
through the domain list, appending each domain name in the list to the
host name, and checking with the specified name servers for a match
(see "Configuring a List of Name Servers" on page 598 ).
P ARAMETERS
These parameters are displayed:
Domain Name – Name of the host. Do not include the initial dot that
separates the host name from the domain name.
(Range: 1-68 characters)
W EB I NTERFACE
To create a list domain names:
1. Click IP Service, DNS.
2. Select Add Domain Name from the Action list.
3. Enter one domain name at a time.
4. Click Apply.
Figure 353: Configuring a List of Domain Names for DNS
To show the list domain names:
1.
Click IP Service, DNS.
2.
Select Show Domain Names from the Action list.