LevelOne GTL-2691 - Manual (Page 1294)

C HAPTER 43 | LLDP Commands
– 1294 –
lldp basic-tlv
system-name
This command configures an LLDP-enabled port to advertise the system
name. Use the no form to disable this feature.
S YNTAX
[no] lldp basic-tlv system-name
D EFAULT S ETTING
Enabled
C OMMAND M ODE
Interface Configuration (Ethernet, Port Channel)
C OMMAND U SAGE
The system name is taken from the sysName object in RFC 3418, which
contains the system’s administratively assigned name, and is in turn based
on the hostname command.
E XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#lldp basic-tlv system-name
Console(config-if)#
lldp dot1-tlv proto-
ident
This command configures an LLDP-enabled port to advertise the supported
protocols. Use the no form to disable this feature.
S YNTAX
[no] lldp dot1-tlv proto-ident
D EFAULT S ETTING
Enabled
C OMMAND M ODE
Interface Configuration (Ethernet, Port Channel)
C OMMAND U SAGE
This option advertises the protocols that are accessible through this
interface.
E XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#no lldp dot1-tlv proto-ident
Console(config-if)#