LevelOne GTL-2691 - Manual (Page 803)

C HAPTER 24 | System Management Commands
Event Logging
– 803 –
show log This command displays the log messages stored in local memory.
S YNTAX
show log {flash | ram}
flash - Event history stored in flash memory (i.e., permanent
memory).
ram - Event history stored in temporary RAM (i.e., memory flushed
on power reset).
D EFAULT S ETTING
None
C OMMAND M ODE
Privileged Exec
E XAMPLE
The following example shows the event message stored in RAM.
Console#show log ram
[1] 00:01:30 2001-01-01
"VLAN 1 link-up notification."
level: 6, module: 5, function: 1, and event no.: 1
[0] 00:01:30 2001-01-01
"Unit 1, Port 1 link-up notification."
level: 6, module: 5, function: 1, and event no.: 1
Console#
show logging This command displays the configuration settings for logging messages to
local switch memory, to an SMTP event handler, or to a remote syslog
server.
S YNTAX
show logging {flash | ram | sendmail | trap}
flash - Displays settings for storing event messages in flash
memory (i.e., permanent memory).
ram - Displays settings for storing event messages in temporary
RAM (i.e., memory flushed on power reset).
sendmail - Displays settings for the SMTP event handler
( page 808 ).
trap - Displays settings for the trap function.
D EFAULT S ETTING
None
C OMMAND M ODE
Privileged Exec