Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) - Manual (Page 837)

Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide 813
53-1003031-02
Displaying 6PE information
9
Invalid Confed aspath:0, maxas-limit aspath:0
Duplicated Originator_ID:0, Cluster_ID:0
Routes Advertised:2, To be Sent:0, To be Withdrawn:0
NLRIs Sent in Update Message:2, Withdraws:0, Replacements:0
Peer Out of Memory Count for:
Receiving Update Messages:0, Accepting Routes(NLRI):0
Attributes:0, Outbound Routes(RIB-out):0 Outbound Routes Holder:0
Syntax: show ip bgp 6pe neighbors routes-summary
Table 158 describes the output parameters of the show ip bgp 6pe neighbors routes-summary
command.
TABLE 158 Output parameters of the show ip bgp 6pe neighbors routes-summary
command
Field Description
Total number of BGP Neighbors Shows the total number of BGP neighbors.
IP Address Shows the IP address of the neighbor.
Routes Shows the number of received routes that were received during the
current BGP4 session:
•
Accepted or Installed – Number of routes that the router accepted
and installed in the BGP4 route table during the current BGP4
session.
•
Filtered or Kept – Number of routes that were filtered out, but were
retained in memory for use by the soft reconfiguration feature.
•
Filtered – Number of received routes filtered out.
Routes Selected as BEST Routes Shows the number of routes that the router selected as the best routes
to their destinations.
BEST Routes not Installed in IP
Forwarding Table Shows the number of routes received from the neighbor that are the
best BGP4 routes to their destinations, but were not installed in the IP
route table because the router received better routes from other sources
(such as OSPF, RIP, or static IP routes).
Unreachable Routes Shows the number of routes received from the neighbor that are
unreachable because the router does not have a valid RIP, OSPF, or
static route to the next hop.
History Routes Shows the number of routes that are down but are being retained for
route flap dampening purposes.
NLRIs Received in Update Message Shows the number of routes received in Network Layer Reachability
Information (NLRI) format in Update messages:
•
Withdraws – Number of withdrawn routes that the router has
received.
•
Replacements – Number of replacement routes that the router has
received.