Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) - Manual (Page 280)

256 Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide
53-1003031-02
Displaying the Traffic Engineering database
1
To clear the RSVP statistics counters.
Brocade# clear mpls rsvp statistics
Syntax: clear mpls rsvp statistics
This command resets the counters listed under “since last clear” for the show mpls rsvp interface
detail and show mpls rsvp statistics commands.
Displaying RSVP session destination information
To display information about the RSVP session destination, use the show mpls rsvp session
destination command.
PathTear The number of PathTear messages sent and received. PathTear messages cause path states
to be deleted.
ResvTear The number of ResvTear messages sent and received. ResvTear messages cause reservation
states to be deleted.
ResvConf The number of reservation confirmation messages sent and received.
Rcv pkt bad
length The number of times a packet was not processed because it was the wrong length.
Rcv pkt
unknown type The number of times an RSVP packet was not processed because it was not one of the types
defined in RFC 2205.
Rcv pkt bad
version The number of times a packet was not processed because it was an RSVP version other than 1
Rcv pkt bad
cksum The number of times a packet was not processed because of a bad RSVP checksum.
Memory alloc
fail The number of times a packet was not processed because RSVP memory allocation failed on
the device.
Rcv pkt processing error
Path The number of Path messages received with a packet processing error.
Resv The number of RESV messages received with a packet processing error.
PathErr The number of PathErr messages received with a packet processing error.
ResvErr The number of ResvErr messages received with a packet processing error.
PathTear The number of PathTear messages received with a packet processing error.
ResvTear The number of reservation confirmation messages received with a packet processing error.
ResvConf The number of reservation confirmation messages received with a packet processing error.
TABLE 31 Output from the show mpls rsvp statistics command (Continued)
This field... Displays...