Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) - Manual (Page 252)

228 Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide
53-1003031-02
Displaying MPLS and RSVP information
1
Displaying MPLS VRF statistics
To display out-packet statistics for VRFs, enter the following command.
Brocade# show mpls statistics vrf
VRF Name In-Port(s) Endpt Out-Pkt Tnl Out-Pkt
red e3/1 0 0
e3/2 0 0
e3/3 0 0
e3/4 0 0
e5/1 - e5/10 0 0
e5/11 - e5/20 0 0
e5/21 - e5/30 0 0
e5/31 - e5/40 0 0
green e3/1 3707480 0
e3/2 2692915 0
e3/3 0 0
e3/4 0 0
e5/1 - e5/10 0 0
e5/11 - e5/20 0 5834179
e5/21 - e5/30 0 0
e5/31 - e5/40 0 0
pink e3/1 0 0
e3/2 0 0
e3/3 0 0
e3/4 0 0
e5/1 - e5/10 0 0
e5/11 - e5/20 0 0
e5/21 - e5/30 0 0
e5/31 - e5/40 0 0
To display out-packet statistics for a specific VRF, enter the following command.
Brocade# show mpls statistics vrf black
VRF Name In-Port(s) Endpt Out-Pkt Tnl Out-Pkt
black e3/1 0 0
e3/2 29607351 0
e3/3 27522998 25828420
e3/4 0 0
e5/1 - e5/10 0 0
e5/11 - e5/20 0 0
e5/21 - e5/30 0 0
e5/31 - e5/40 0 0
e5/31 - e5/40 0
Table 17 lists the output for the show mpls statistics vrf command.
TABLE 17 show mpls statistics VRF parameters
This field... Displays...
VRF Name The name of the VRF from which packets originated or are destined.
In-Port(s) The port that is either the VRF or MPLS interface.