Displaying the best bgp4 routes – Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) User Manual
Page 713

Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide
689
53-1003031-02
Displaying BGP or MPLS VRF information
6
The unreachable option displays the routes that are unreachable because the Brocade device does
not have a valid RIP, OSPF, or static route to the next hop.
For information about the fields in this display, refer to
641. The fields in this
display also appear in the show ip bgp vpnv4 display.
Displaying the best BGP4 routes
To display all the BGP4 routes in the device’s BGP4 route table that are the best routes to their
destinations, enter a command such as the following at any level of the CLI.
Brocade# show ip bgp vrf black routes best
Searching for matching routes, use ^C to quit...
Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST C:CONFED_EBGP D:DAMPED
E:EBGP H:HISTORY I:IBGP L:LOCAL M:MULTIPATH S:SUPPRESSED F:FILTERED
Prefix Next Hop Metric LocPrf Weight Status
1 10.7.7.7/32 0.0.0.0 0 100 32768 BL
AS_PATH:
2 10.10.2.0/24 0.0.0.0 0 100 32768 BL
AS_PATH:
3 10.10.3.0/24 0.0.0.0 0 100 32768 BL
AS_PATH:
4 10.10.4.0/24 0.0.0.0 0 100 32768 BL
AS_PATH:
5 10.100.100.1/32 10.10.2.3 100 0 BE
AS_PATH: 310
6 10.100.100.2/32 10.10.2.3 100 0 BE
AS_PATH: 310
7 10.100.100.3/32 10.10.2.3 100 0 BE
AS_PATH: 310
8 10.100.100.4/32 10.10.2.3 100 0 BE
AS_PATH: 310
9 10.100.100.5/32 10.10.2.3 100 0 BE
AS_PATH: 310
Syntax: show ip bgp vrf vrf-name routes best
For information about the fields in this display, refer to
667.
Displaying best BGP4 routes that are not in the IP route table
When the Brocade device has multiple routes to a destination, the Brocade device selects the route
with the lowest administrative distance as the best route, and installs that route in the IP route
table.
To display the BGP4 routes for a specified VRF that are the “best” routes to their destinations but
are not installed in the device’s IP route table, enter a command such as the following at any level
of the CLI.