Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) - Manual (Page 579)

Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide 555
53-1003031-02
Clearing Local VLL traffic statistics
4
The vll-name variable is the configured name for a VLL instance.
The vll-id variable is the ID of a VLL instance.
For following information is displayed in the show mpls statistics vll command.
TABLE 93 Output from the show mpls vll command
This field... Displays...
VLL-Name The configured name of the VLL instance.
VLL-Ports The port where the traffic is monitored.
VLL-Ingress-Pkts Packets arriving from the Customer Endpoint.
VLL-Egress-Pkts Packets arriving from the MPLS core and going to the customer interface.
Clearing Local VLL traffic statistics
To clear all the statistics for all the Local VLL instances, enter the following command.
Brocade# clear mpls statistics vll-local
To clear all the statistics for a particular Local VLL instance, enter the following command.
Brocade# clear mpls statistics vll-local loc8
Syntax: clear mpls statistics vll-local [vll-name | vll-id]
The vll-name parameter specifies the configured name for a Local VLL instance.
The vll-id parameter specifies the ID of a Local VLL instance.
Sample MPLS VLL configuration
Figure 60 depicts a sample VLL configuration.
FIGURE 60 MPLS VLL configuration