Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) - Manual (Page 527)

Brocade# show mpls vpls id 200
VPLS vc_mismatched, Id 200, Max macentries: 8192
Total vlans: 1, Tagged ports: 1 (1 Up), Untagged ports 0 (0 Up)
IFL-ID: 4098
Vlan200 inner-vlan145
Tagged: ethe2/1
VC-Mode: Tagged
Total VPLS peers: 1 (0 Operational)
Peer address: 10.33.33.33, State: Wait for PW Up (VC type mismatched)
Tnnlin use: tnl0(2)
LDP session: Up, Local VC lbl: N/A, Remote VC lbl: N/A
Local VC MTU: 1500, Remote VC MTU: N/A
LOCAL VC-Type: Ethernet Tagged (0x04), Remote VC-Type: Ethernet (0x05)
Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide 503
53-1003031-02
Displaying VPLS information
3
When a MTU mismatch occurs, the output from the show mpls vpls id vpls-id command displays
the Wait for PW Up (MTU mismatched) state. The Wait for VC parameter check (MTU mismatched)
state no longer displays. The total VC labels allocated field is also removed from the output. In the
following example, a MTU mismatch has occurred, and the PW is down. The Local VC lbl field and
the Remote VC lbl field display N/A (not applicable).
NOTE
When both the VC type and MTU are mismatched, only the output from the VC type mismatch is
displayed on the console.
Brocade# show mpls vpls id 300
VPLS mtu_mismatched, Id 300, Max macentries: 8192
Total vlans: 1, Tagged ports: 1 (1 Up), Untagged ports 0 (0 Up)
IFL-ID: 4099
Vlan100 inner-vlan145
Tagged: ethe1/1
VC-Mode: Tagged
Total VPLS peers: 1 (0 Operational)
Peer address: 10.44.44.44, State: Wait for PW Up (MTU mismatched)
Tnnlin use: tnl3(3)
LDP session: Up, Local VC lbl: N/A, Remote VC lbl: N/A
Local VC MTU: 1500, Remote VC MTU: 2500,
LOCAL VC-Type: Ethernet Tagged (0x04), Ethernet Tagged (0x04)
The Wait for remote VC label from Peer state no longer displays in the output of the show mpls vpls
id vpls-id command. The Wait for PW Up (Wait for remote VC label) state now displays, and replaces
the existing state. The total VC labels allocated field is also removed from the output. In the
following example, the PW is down and it is waiting for the VC label of the remote peer to advertise
to the VPLS peer. The Local VC lbl field and the Remote VC MTU field displays N/A (non applicable).