Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) - Manual (Page 677)

Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide 653
53-1003031-02
Displaying BGP or MPLS VPNv4 information
6
Displaying advertised routes for a specified VPNv4 neighbor
To display the routes the device has advertised to a specific VPNv4 neighbor, enter a command
such as the following at any level of the CLI.
Brocade# show ip bgp vpnv4 neighbors 10.2.2.2 advertised-routes
There are 231 routes advertised to neighbor 10.2.2.2
Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST E:EBGP I:IBGP L:LOCAL
Prefix Next Hop Metric LocPrf Weight Status
1 10.100.100.30/32 0.0.0.0 100 0 BE
AS_PATH: 310
2 10.100.100.29/32 0.0.0.0 100 0 BE
AS_PATH: 310
3 10.100.100.28/32 0.0.0.0 100 0 BE
AS_PATH: 310
4 10.100.100.27/32 0.0.0.0 100 0 BE
AS_PATH: 310
5 10.100.100.26/32 0.0.0.0 100 0 BE
AS_PATH: 310
6 10.100.100.25/32 0.0.0.0 100 0 BE
AS_PATH: 310
7 10.100.100.24/32 0.0.0.0 100 0 BE
AS_PATH: 310
8 10.100.100.23/32 0.0.0.0 100 0 BE
AS_PATH: 310
Syntax: show ip bgp vpnv4 neighbor ip-addr advertised-routes [ip-addr/prefix]
For information about the fields in this display, refer to Table 109 on page 641.
Displaying attribute entries for a specified VPNv4 neighbor
The neighbor attribute entries table lists the sets of BGP4 attributes stored in device memory. Each
set of attributes is unique and can be associated with one or more routes. In fact, the device
typically has fewer route attribute entries than routes. To display the route-attribute entries table for
a specified VPNv4 neighbor, enter the following command.
TotalRcv The number of sequence numbers received from the neighbor.
DupliRcv The number of duplicate sequence numbers received from the
neighbor.
RcvWnd The size of the receive window.
SendQue The number of sequence numbers in the send queue.
RcvQue The number of sequence numbers in the receive queue.
CngstWnd The number of times the window has changed.
TABLE 114 BGP4 neighbor information (Continued)
This field... Displays...