Mtu mismatched, No remote vc label – Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) User Manual
Page 536
![background image](/manuals/361646/536/background.png)
Brocade# show mpls vpls id 200
VPLS vc_mismatched, Id 200, Max mac entries: 8192
Total vlans: 1, Tagged ports: 1 (1 Up), Untagged ports 0 (0 Up)
IFL-ID: 4098
Vlan 200 inner-vlan 145
Tagged: ethe 2/1
VC-Mode: Tagged
Total VPLS peers: 1 (0 Operational)
Peer address: 10.33.33.33, State: Wait for PW Up (VC type mismatched)
Tnnl in use: tnl0(2)
LDP session: Up, Local VC lbl: N/A, Remote VC lbl: N/A
Local VC MTU: 1500, Remote VC MTU: N/A
LOCAL VC-Type: Ethernet Tagged (0x04), Remote VC-Type: Ethernet (0x05)
CPU-Protection: OFF
Local Switching: Enabled
512
Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide
53-1003031-02
VPLS LDP
3
The local VC label and remote VC label display is performed only when the Peer is in Operational
state. Else, it displays N/A for these fields.
The remote VC Type is the same as the local VC type when the peer state is Operational, else, it is
shown as N/A.
MTU mismatched
The following example shows the output for the LDP integration for a MTU mismatched case.
Brocade# show mpls vpls id 300
VPLS mtu_mismatched, Id 300, Max mac entries: 8192
Total vlans: 1, Tagged ports: 1 (1 Up), Untagged ports 0 (0 Up)
IFL-ID: 4099
Vlan 100 inner-vlan 145
Tagged: ethe 1/1
VC-Mode: Tagged
Total VPLS peers: 1 (0 Operational)
Peer address: 10.44.44.44, State: Wait for PW Up (MTU mismatched)
Tnnl in use: tnl3(3)
LDP session: Up, Local VC lbl: N/A, Remote VC lbl: N/A
Local VC MTU: 1500, Remote VC MTU: 2500,
LOCAL VC-Type: Ethernet Tagged (0x04), Ethernet Tagged (0x04)
CPU-Protection: OFF
Local Switching: Enabled
No remote VC label
The following example shows the output for the LDP integration for a no remote VC label case.