Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) User Manual
Page 276
252
Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide
53-1003031-02
Displaying the Traffic Engineering database
1
The extensive option provides the contents of the history buffer for the last 20 RSVP events, as
shown in the following example.
Brocade# show mpls rsvp session extensive
Codes: DI:Ingress Detour DT:Transit Detour DM:Merged Detour
DE:Egress Detour BI:Ingress Backup BM: Merged Backup BE:Egress Backup
RP:Repaired Session BYI: Bypass Ingress
Ingress RSVP: 7 session(s)
To From St Style Lbl_In Lbl_Out Out_If LSPname
10.33.33.33 10.11.11.11(DI) Up SE - 3 e4/4 rj-vpls
Tunnel ID: 1, LSP ID: 1
Time left in seconds (PATH refresh: 10, ttd: 4288020
RESV refresh: 0, ttd: 4288177)
Tspec: peak 0 kbps rate 0 kbps size 0 bytes m 20 M 65535
Explicit path hop count: 1
10.0.0.6 (S)
Received RRO count: 1
Protection codes/Rtr Id flag: P: Local N: Node B: Bandwidth I: InUse R: RtrId
10.0.0.6
Detour Sent: Number of PLR and Avoid Node ID pair(s): 1
[1]: PLR: 10.1.1.1 Avoid Node: 10.1.1.2
PATH sentto: 10.0.0.6 (e4/4 ) (MD5 OFF)
RESV rcvfrom: 10.0.0.6 (e4/4 ) (MD5 OFF)
PATH history:
1 Dec 10 11:57:59 Query route to 10.33.33.33: nhop 10.0.0.6
2 Dec 10 11:57:59 Tx PATH: out if(e4/4), flg(0x01000500/0x0000000a)
3 Dec 10 11:57:59 Rx RESV: label(3), flg(0x01000500/0x0000000a)
4 Dec 10 11:57:59 Tx cnnt req: hdl(0x0010c001), flg(0x01100500/0x0000000a)
5 Dec 10 11:57:59 Start TC event(NEW_FLOW): action(0x0000000a)
6 Dec 10 11:57:59 Rx cnnt resp: hdl(0x0010c001), flg(0x01100500/0x0000000a)
7 Dec 10 11:57:59 Complete TC event(NEW_FLOW)
RESV history:
1 Dec 10 11:57:59 Add RSB: style(SE), filterSpec(1), flg(0x00000000)
2 Dec 10 11:57:59 Add filterSpec: 10.11.11.11/1, label(3)
The show mpls rsvp session command with the extensive option displays the same information
described in
, as well as a history of the last 20 RSVP
events with each event containing the following information:
•
Event index (used to provide the total number of events)
•
Time stamp
•
File name and line number where the event is logged
•
Event description and extra information associated with each event. For repeated events, such
as route query, the attempt count indicates the number of times the event has occurred.
The show mpls rsvp session wide command allows the user to display the full LSP name in a single
line. Previously, a long LSP name (greater than 12 characters) was text-wrapped in multiple lines.
Now, the full LSP name can be displayed in a single line as shown in the following example.