Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) User Manual
Page 682
Brocade# show ip bgp vpnv4 neighbor 10.10.2.3 rib-out-routes
There are 154 RIB_out routes for neighbor 10.10.2.3
Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST E:EBGP I:IBGP L:LOCAL
Prefix Next Hop Metric LocPrf Weight Status
1 10.100.101.30/32 10.10.3.3 100 0 BE
AS_PATH: 311
2 10.100.101.29/32 10.10.3.3 100 0 BE
AS_PATH: 311
3 10.100.101.28/32 10.10.3.3 100 0 BE
AS_PATH: 311
4 10.100.101.27/32 10.10.3.3 100 0 BE
AS_PATH: 311
5 10.100.101.26/32 10.10.3.3 100 0 BE
AS_PATH: 311
6 10.100.101.25/32 10.10.3.3 100 0 BE
AS_PATH: 311
7 10.100.101.24/32 10.10.3.3 100 0 BE
AS_PATH: 311
8 10.100.101.23/32 10.10.3.3 100 0 BE
AS_PATH: 311
9 10.100.101.22/32 10.10.3.3 100 0 BE
AS_PATH: 311
10 10.100.101.21/32 10.10.3.3 100 0 BE
AS_PATH: 311
658
Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide
53-1003031-02
Displaying BGP or MPLS VPNv4 information
6
The Adj-RIB-Out contains the routes that the device either has most recently sent to the VRF
neighbor or is about to send to the neighbor.
Syntax: show ip bgp vpnv4 neighbor ip-addr rib-out-routes [ip-addr/prefix]
For information about the fields in this display, refer to
641.
Displaying routes summary for a specified VPNv4 neighbor
To view the route table for a specified VPNv4 neighbor, enter the following command.
Brocade# show ip bgp vpnv4 neighbor 10.10.2.3 routes-summary
1 IP Address: 10.10.2.3
Routes Accepted/Installed:30, Filtered/Kept:0, Filtered:0
Routes Selected as BEST Routes:30
BEST Routes not Installed in IP Forwarding Table:0
Unreachable Routes (no IGP Route for NEXTHOP):0
History Routes:0
NLRIs Received in Update Message:30, Withdraws:0 (0), Replacements:0
NLRIs Discarded due to
Maximum Prefix Limit:0, AS Loop:0
Invalid Nexthop:0, Invalid Nexthop Address:0.0.0.0
Duplicated Originator_ID:0, Cluster_ID:0
Routes Advertised:154, To be Sent:0, To be Withdrawn:0
NLRIs Sent in Update Message:154, Withdraws:0, Replacements:0
Peer Out of Memory Count for:
Receiving Update Messages:0, Accepting Routes(NLRI):0
Attributes:0, Outbound Routes(RIB-out):0 Outbound Routes Holder:0
This display shows the following information.