Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) User Manual
Page 344
320
Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide
53-1003031-02
show mpls ldp session a.b.c.d/brief/detail [filtered [in|out]]
2
Outbound FEC filtering prefix-list: list-out
FECs received from peer and filtered inbound
3 192.168.1.6/32
3 192.168.1.7/32
3 192.168.1.8/32
3 192.168.1.9/32
3 192.168.1.10/32
Router # show mpls ldp session 10.12.12.12 filtered out
Number of link LDP sessions: 1
Number of Operational link LDP sessions: 1
Number of targeted LDP sessions: 0
Number of Operational targeted LDP sessions: 0
Peer LDP ID: 0.12.12.12:0, Local LDP ID: 10.14.14.14:0, State: Operational
Adj: Link, Role: Active, Next keepalive: 4 sec, Hold time left: 39 sec
Keepalive interval: 5 sec, Max hold time: 40 sec
Configured keepalive timeout: 40 sec
Peer proposed keepalive timeout: 49 sec
Up time: 17 hr 21 min 23 sec
Neighboring interfaces: e2/1
TCP connection: 10.14.14.14:9005--10.12.12.12:646, State: ESTABLISHED
Next-hop addresses received from the peer:
10.12.12.12 10.21.21.12 10.23.23.12 10.29.29.12 192.168.1.1
192.168.1.2 192.168.1.3 192.168.1.4 192.168.1.5
IGP Sync:
Unrecognized Notification Capability: Local: Off, Remote: Off
Local State: In-sync, RemoteState: -
Receive label silence time: 1000 ms, Timer not running
Graceful restart: disabled
Number of FECs Received from peer: 7
Number of FECs installed from peer: 2
Number of FECs filtered for peer(in/out): 5/3
Outbound FEC filtering prefix-list: list-out
FECs not advertised to peer because of outbound filter
192.168.1.3/32
192.168.1.4/32
192.168.1.5/32
History
Release
Command history
Multi-Service NetIron Release 05.600 The command show mpls ldp session a.b.c.d is extended to include the
option filtered.
Multi-Service NetIron Release 05.500 The show mpls ldp session command output was enhanced to display the
total number of link and targeted sessions in operational state.
Related
commands
None.