beautypg.com

Bandwidth-ceiling – Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) User Manual

Page 78

background image

54

Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide

53-1003031-02

bandwidth-ceiling

1

bandwidth-ceiling

This command adds a new threshold change point to the autobw-threshold table. If the change
point is already there, the value of the threshold is updated.

The [no] function of the command remove the bandwidth ceiling entry from the table.

Syntax

[no] bandwidth-ceiling [bw in kbps|max] threshold threshold in kbps

Parameters

bw in kbps

The bandwidth in kilobytes per second. 0 – 0x7FFFFFFF. Range of bandwidth in kbps.

threshold in kbps

The threshold in kilobytes per second. 0 – 0x7FFFFFFF. Range of bandwidth in kbps.

max

Sets the threshold for any traffic-rate above the maximum bandwidth-ceiling configured in the

table

Command

modes

This command operates in the MPLS global adjustment threshold configuration mode.

Usage guidelines

Review the updated global adjustment-threshold table after this command is executed.

The first parameter indicates that any rate above the maximum ceiling configured.

The max keyword sets the threshold for any traffic-rate above the maximum bandwidth-ceiling
configured in the table.

History

Release

Command history

Multi-Service NetIron Release 05.6.00 This command was introduced.

Related

commands

None.