Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) User Manual
Page 422
398
Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide
53-1003031-02
show mpls config
2
The vpls option lets the user limit the display to configuration information for the VLL specified
by vpls_name variable.
bypass-lsp
The bypass-lsp option lets the user limit the display to information for the bypass LSP specified
by bypass_name variable.
Modes
This command operates in all modes.
Usage guidelines
When an option is used without a variable specified, the configuration parameters for the option
are shown for all elements that match the option are displayed.
Command
output
Output field
Description
traffic-eng
Sets the traffic engineering parameters.
mpls-interface
The interface type refers to any one of the following:
•
ethernet slot and port to limit the display to a single ethernet port.
•
pos slot and port to limit the display to a single POS port.
•
ve vid to limit the display to a VE interface ID specified by the vid variable.
rsvp-hello
Hello-interval Frequency at which RSVP-TE Hello Request messages are sent on the
interface, in seconds.
Hello-tolerance The number of hello periods which may pass without receiving a
complete Hello message before the Hello session times out.
The show mpls config command displays the following information.
Example
Output 1: Hello configuration with default configuration on interface ethernet 1/12
(auto-generated).
Brocade# show mpls config
router mpls
policy
traffic-eng isis level-2
mpls-interface e1/12
rsvp-hello interval 9 tolerance 3
end of MPLS configuration
Output 2: Hello configuration with non-default configuration on interface ethernet 1/12 and with
configuration of hello-acknowledgements and non-default configuration at the rsvp global level.
Brocade# show mpls config
router mpls
policy
traffic-eng isis level-2
rsvp
rsvp-hello interval 15 tolerance 5
rsvp-hello acknowledgements
mpls-interface e1/12
rsvp-hello interval 10 tolerance 4