beautypg.com

Show mpls lsp extensive – Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) User Manual

Page 57

background image

Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide

33

53-1003031-02

RSVP soft preemption

1

soft-preemption

secondary p2

traffic-eng mean-rate 5555

adaptive

soft-preemption

enable

Show mpls lsp extensive

Use the show mpls lsp extensive command to view the policy and detailed history.

Syntax: Show mpls lsp lsp name [detail | extensive]

Brocade(config-mpls)# show mpls lsp name low ext

LSP low, to 10.80.80.80

From: 10.40.40.40, admin: UP, status: UP, tunnel interface(primary path): tnl1

Times primary LSP goes up since enabled: 1

Metric: 0, number of installed aliases: 0 Adaptive

Maximum retries: NONE, no. of retries: 0

Pri. path: NONE, up: yes, active: yes

Setup priority: 3, hold priority: 3

Max rate: 0 kbps, mean rate: 1000 kbps, max burst: 0 bytes

Constraint-based routing enabled: yes

Path calculated using constraint-based routing: yes

Path calculated using interface constraint: no

cost: 3

Tie breaking: random, hop limit: 0

LDP tunneling enabled: no

Soft preemption enabled: yes

Active Path attributes:

Tunnel interface: tnl1, outbound interface: e1/1

Tunnel index: 3, Tunnel instance: 3 outbound label: 1026

Auto-bandwidth is globally disabled.

Recorded routes:

Protection codes: P: Local N: Node B: Bandwidth I: InUse

10.1.1.5 -> 10.11.11.7 -> 10.8.8.8

History

11 Nov 21 08:56:20 : Path received path-error from 10.1.1.5. Error code 21,

Error value: 2:

12 Nov 21 08:56:54 : LSP simple retry[2 times]

13 Nov 21 08:57:24 : CSPF-Computation successful for Primary path . Route:

->10.1.1.5->10.11.11.7->10.8.8.8

14 Nov 21 08:57:24 : Primary path setup successful for New instance of Path

15 Nov 21 08:57:24 : Tunnel added or updated, out-interface: e1/1, out-label

1027

16 Nov 21 08:57:24 : New instance of Primary path is Active

17 Nov 21 08:58:52 : Path received path-error from 10.11.11.7. Error code 24,

Error value: 8:MPLS Service Break

18 Nov 21 08:58:52 : Primary path torn down

19 Nov 21 08:58:52 : LSP tunnel is DOWN

20 Nov 21 08:58:52 : Tunnel deleted

21 Nov 21 08:58:52 : CSPF-Computation successful for Primary path . Route:

->10.1.1.5->10.11.11.7->10.8.8.8[2 times]

22 Nov 21 08:58:52 : Path received path-error from 10.11.11.7. Error code 24,

Error value: 5:No route to destination