beautypg.com

Scenario e: dynamic bypass creation from all plrs – Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) User Manual

Page 211

background image

Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide

187

53-1003031-02

Dynamic Bypass LSPs

1

Scenario E: Dynamic bypass creation from all PLRs

Dynamic bypass LSP creation on a fully connected network is as below. When there is a path
available, all PLRs, except penultimate node, creates dynamic bypass LSPs with node protection.
This is illustrated in

Figure

31

below.

FIGURE 31

Dynamic bypass creation from all PLRs