beautypg.com

Bandwidth-ceiling max threshold – Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) User Manual

Page 79

background image

Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide

55

53-1003031-02

bandwidth-ceiling max threshold

1

bandwidth-ceiling max threshold

This command sets the threshold for any traffic-rate above the maximum bandwidth-ceiling
configured in the table.

The [no] function of the command removes the entry.

Syntax

[no] bandwidth-ceiling max threshold threshold in kbps

Parameters

max

Any rate above the maximum ceiling configured. By default, the last ceiling is used.

threshold in kbps

Threshold in kilobytes per second. 0 – 0x7FFFFFFF. Range of bandwidth in kbps.

NOTE

The first parameter indicates that any rate above the maximum ceiling configured, the second
parameter is the threshold in kbps for those rates.

Command

modes

This command operates in MPLS global adjustment threshold configuration mode.

History

Release

Command history

Multi-Service NetIron Release 05.6.00 The command was introduced.

Related

commands

None.