Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) - Manual (Page 224)

200 Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide
53-1003031-02
show mpls config
1
show mpls config
The configuration which enables liberal mode displays as part of the command. By default, this
option is disabled and not shown. This is different from the command of cspf-computation-mode
use-bypass-metric, which shows disabled when not enabled.
Syntax show mpls config [use-bypass-liberal]
Parameters use-bypass-liberal
Use liberal mode for CSPF facility backup computation.
Command
modes
This command operates under the MPLS router mode (config-mpls-policy).
Usage guidelines The configuration, use-bypass-liberal, is used when the user wants a bypass LSP, if available, to be
used as a backup for a FRR which has limited constraints for calculating the path (for example, to
allow it to reach the MP from downstream node).
Command
output
Output field Description
cspf-computation-mode use-bypass-metric TE metric of TE link for CSPF computation.
cspf-computation-mode use-bypass-liberal Liberal mode for CSPF facility backup computation.
Example
Brocade# show mpls config
router mpls
policy
cspf-computation-mode use-bypass-metric
cspf-computation-mode use-bypass-liberal
. . .
History
Release Command history
Multi-Service IronWare R05.6.00 The show mpls config command was enhance to include use-bypass-liberal
under the cspf-computation-mode command output line.
Multi-Service IronWare R05.5.00 This command was enhanced to display the label withdrawal delay setting.
Related
commands
None.