Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) - Manual (Page 470)

446 Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide
53-1003031-02
show run
2
show run
The show run command shows the configuration of the feature with the configured IP address
when it is enabled.
Syntax show run
Command
default
None.
Parameters None.
Modes User EXEC mode.
Command
output
Output field Description
run Displays the current running configuration.
Example
Brocade# show run
router mpls
policy
traffic-eng ospf
ldp
lsr-id 10.2.2.2
mpls-interface e1/1
enable
interface e1/2
enable
lsp 2
to 10.20.20.20
enable
vpls vpls 1
vpls-peer 10.2.2.2
multicast passive
multicast tracking
end of MPLS configuration
History
Release Modification
NetIron R05.5.00 Shows the configuration of the feature with the configured IP address when it is enabled.
Related
commands
None.