Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) - Manual (Page 763)

Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide 739
53-1003031-02
show cam ipvpn slot/port
6
show cam ipvpn slot/port
The output of show cam ipvpn slot/port is modified to add VPNID in the display.
Syntax Show cam ipvpn slot/port
Parameters slot/port
The slot/port parameter specifies the port for which you want to display the CAM entries.
Command
Modes
Privileged EXEC mode.
Usage
Guidelines
Use to display IPv4 VPN CAM entries, including local (port+VLAN+IP) and remote (VC+IP) entries.
Command
output
Output field Description
LP Shows the number of the interface module.
Index (Hex) Shows the row number of this entry in the IP route table.
IP Address Shows the IP address of the interface.
In Port Shows the port number.
In VLAN Shows the VLAN number.
VPNID Shows VPNID in the display.
In VC Lb Shows VC label.
MAC Shows the MAC address of the interface.
Age Shows whether the age is enabled or disabled.
IFL VLAN Shows the VLAN to which the port belongs.
IF Shows the state of outgoing interface action.
PRAM (Hex) Shows the ACL PRAM entries.
Example The following example illustrates the new display after optimization.
Brocade(config)# show cam ipvpn 1/7
LP Index IP Address In In VPNID In MAC Age IFL/ IF PRAM
(Hex) Port VLAN VC Lb VLAN (Hex)
1 308fa 10.0.0.0/32 N/A N/A 4097 N/A N/A Dis N/A Drop 000a8
1 308fb 10.0.0.255/32 N/A N/A 4097 N/A N/A Dis N/A Mgmt 000a7
1 308fc 10.0.0.22/32 N/A N/A 4097 N/A N/A Dis N/A Mgmt 000a6
1 308fd 192.168.1.0/32 N/A N/A 4097 N/A N/A Dis N/A Drop 000a5
1 308fe 192.168.1.255/32N/A N/A 4097 N/A N/A Dis N/A Mgmt 000a4
1 308ff 192.168.1.1/32 N/A N/A 4097 N/A N/A Dis N/A Mgmt 000a3
1 3e566 10.0.0.0/24 N/A N/A 4097 N/A N/A Dis N/A CPU 000a9
1 3e567 192.168.1.0/24 N/A N/A 4097 N/A N/A Dis N/A CPU 000a1