Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) - Manual (Page 522)

498 Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide
53-1003031-02
Displaying VPLS information
3
Displaying information about VPLS instances
The show mpls vpls brief command has changed. The Num VC-label field is no longer displayed in
the output of the show mpls vpls brief command.
To display information about VPLS instances configured on the device, enter the following
command.
Brocade show mpls vpls brief
Num Num Ports Num Peers CPU VC
Name Id Vlans Ports Up Peers Up IFL-ID Prot Mode
==== == ===== ===== ===== ===== ===== ====== ==== ======
1 1 2 2 2 1 1 4096 OFF TAGGED
2 2 1 0 0 1 0 n/a OFF RAW
3 3 2 6 4 2 1 n/a OFF RAW
Syntax: show mpls vpls brief
Table 76 lists the output displayed by the show mpls vpls brief command.
TABLE 76 Output from the show mpls vpls brief command
Field Description
Name The configured name of the VPLS instance.
Id The ID of this VPLS instance.
Num Vlans The total number of single-tagged and dual-tagged VLANs associated with this VPLS instance.
Num Ports The number of ports in this VPLS instance.
Ports Up The number of ports in this VPLS instance that are up.
Num Peers The number of VPLS peers this device has for this VPLS instance.
Peers Up The number of VPLS peers with which a VC connection is completely operational.
IFL-ID The Internal Forwarding Lookup Identifier (IFL-ID) for dual-tagged VLAN ports in this VPLS
instance.
CPU Prot Whether CPU protection configured on this VPLS instance is ON or OFF.
VC Mode The VC mode for the VPLS instance:
• Raw – The VLAN tag information in the original payload is not
carried across the MPLS cloud.
• Tagged – The VLAN tag information in the original payload is carried
across the MPLS cloud.
Displaying detailed information about VPLS instances
The show mpls vpls detail command has changed. The total VC labels allocated field is no longer
displayed in the output of the show mpls vpls detail command.
To display more detailed information about each VPLS instance, enter the following command.