Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) - Manual (Page 468)

444 Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide
53-1003031-02
show mpls ldp fec prefix
2
Examples The following example displays prefix FEC information from the LDP FEC database:
Brocade# show mpls ldp fec prefix
Total number of prefix FECs: 31
Total number of prefix FECs with LWD timer running: 10
Destination State Out-intf Next-hop Ingress Egress
11.11.11.11/32 current -- -- No No
42.42.42.29/32 retained -- -- No No
The following example displays prefix FEC information for IP address 16.16.16.16:
Brocade# show mpls ldp fec prefix 16.16.16.16
FEC_CB: 0x2d9029d4, idx: 6, type: 2, pend_notif: None
State: current, Ingr: Yes, Egr: No, UM Dist. done: No
Prefix: 16.16.16.16/32
Label Withdrawal Delay: Active: Time Remaining: 10s
next_hop: 56.56.1.16, out_if: e1/1
Downstream mappings:
(*) indicates delayed processing for this DM
Local LDP ID Peer LDP ID Label State CB
15.15.1.15:0 16.16.16.16:0 3 Installed* 0x2d8ba878
Upstream mappings:
Local LDP ID Peer LDP ID Label CB
15.15.1.15:0 14.14.14.14:0 100 0x2d8ba878
History
Release Command history
Multi-Service IronWare R05.5.00 This command was enhanced to display label withdrawal delay information
Egr Whether the FEC is an egress FEC.
UM Dist Specifies when Upstream Mapping Distribution is complete.
Prefix The IP Prefix associated with the host address or the prefix FEC type.
Label Withdrawal Delay Label withdrawal delay state.
Time Remaining Time remaining on the label withdrawal delay timer in seconds.
next_hop For an ingress FEC, this mentions the next- hop IP address. When LDP selects its
outgoing interface as an RSVP tunnel, the next_hop field displays the RSVP tunnel
destination address.
out_if For an ingress FEC, this mentions the output interface to reach to the Next-hop. When
applicable, the Out-Intf field displays a VE interface specified by the variable.
Downstream Mappings Contents of the downstream mapping CB created as a result of the label mapping
received from the downstream LDP peer.
Local LDP ID Local LDP ID of the LDP session to which this downstream mapping CB belongs.
Peer LDP ID Remote LDP ID of the LDP session to which this downstream mapping CB belongs.
Label MPLS label received from the downstream LSR.
State State of label. Either installed or retained.
CB Memory address of the downstream mapping CB.
Output field Description