Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) - Manual (Page 421)

Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide 397
53-1003031-02
show mpls config
2
show mpls config
The show mpls config command displays the MPLS configuration on the router.
Syntax show mpls config [autobw-template template_name | static-lsp transit | dynamic-bypass |
cspf-group cspf-group_name | brief |lsp lsp_name | path path_name | interface interface_name
| vll vll_name| vll-local vll_local_name | vpls vpls_name | bypass-lsp bypass_name]
Parameters autobw-template
The autobw-template option lets the user display the named auto bandwidth template
configuration information for the path specified by the template_name variable.
static-lsp
The static-lsp option lets the user display the named mpls static transit LSPs configuration
information for the path specified by the transit variable.
dynamic-bypass
The dynamic-bypass options lets you display the dynamic bypass configuration information.
cspf-group
The cspf-group option lets the user display the named cspf-group configuration information for
the path specified by the cspf_group_name variable.
brief
The brief option lets the user display the brief MPLS configuration information.
lsp
The lsp option lets the user limit the display to configuration information for the LSP specified
by lsp_name variable.
path
The path option lets the user limit the display to configuration information for the path
specified by path_name variable.
interface
The interface option allows the user to limit the display to configuration information for a
specified MPLS interface. The interface_name can be either a POS, Ethernet, or VE enabled
interface. A POS or Ethernet interface is specified by interface type and slot and port. For
example, ethernet 3/2 specifies an Ethernet interface on port 2 of the Interface module
installed in slot 3. The VE interface ID specified by the vid variable.
vll
The mpls vll option lets the user limit the display to configuration information for the VLL
specified by vll_name variable.
vll-local
The vll-local option lets the user limit the display to configuration information for the Local VLL
specified by the vll_local_name variable.
vpls