Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) - Manual (Page 529)

Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide 505
53-1003031-02
Displaying VPLS information
3
The vpls-id variable is the ID of a VPLS instance. The vpls-name variable is the name of a VPLS
instance.
Displaying VPLS CPU protection configuration status
The show mpls vpls id command has changed. The total VC labels allocated field is no longer
displayed in the output of the show mpls vpls id command.
To see the VPLS CPU protection configuration status for a specified VPLS, use the show mpls vpls id
command.
Brocade(config)# show mpls vpls id 1
VPLS test1, Id 1, Max mac entries: 2048
Total vlans: 1, Tagged ports: 1 (0 Up), Untagged ports 1 (1 Up)
Vlan 2
Tagged: ethe 5/4
Untagged: ethe 2/2
Total VPLS peers: 1 (0 Operational)
Peer address: 10.1.1.1, State: Wait for remote VC label from Peer
Tnnl: tnl0(3), LDP session: Up, Local VC lbl: 983040, Remote VC lbl: N/A
CPU-Protection: ON, MVID: 0x000, VPLS FID: 0x00000205
The CPU protection status is highlighted in the previous example. It can be either on or off. When
CPU protection status is enabled on the VPLS but is temporarily off due to unavailable FID
resources, the following message is shown in the CPU-Protection field:
CPU-Protection: OFF [Resource FID Failure, Retry in 18 seconds (approximate)]
Syntax: show mpls vpls id [vpls-id]
The vpls-id variable is the ID of a VPLS instance.
Displaying information about VPLS instances that are not operational
The show mpls vpls down command has changed. The Num VC-label field no longer displays in the
output of the show mpls vpls down command.
To display information about VPLS instances that are not fully operational, enter the following
command.
Brocade# show mpls vpls down
The following VPLS’s are not completely operational:
Num Num Ports Num Peers
Name Id Vlans Ports Up Peers Up
test1 1 1 1 1 1 0
test2 2 1 2 1 1 0
test3 3 1 1 1 1 0
test4 4 1 2 1 1 0
Syntax: show mpls vpls down