Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) - Manual (Page 732)

Brocade# show ip rip vrf black
RIP Summary
Default port 520
Administrative distance is 120
Updates every 30 seconds, expire after 180
Holddown lasts 180 seconds, garbage collect after 120
Last broadcast 27, Next Update 29
Need trigger update 0, Next trigger broadcast 3
Minimum update interval 25, Max update Interval 5
Split horizon is on; poison reverse is off
Import metric 1
Prefix List, Inbound : Not set
Prefix List, Outbound : Not set
Route-map, Inbound : Not set
708 Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide
53-1003031-02
Displaying additional BGP or MPLS VPN information
6
Syntax: show ip rip vrf vrf-name [interface [ethernet slot/port]] | [route ipaddress]
The vrf-name parameter specifies the VRF that the user wants to display IP route information for.
To clear all RIP routes from a specified VRF, enter the following command.
Brocade# clear ip rip routes vrf blue
Syntax: clear ip rip routes vrf vrf-name
To clear all local RIP routes from a specified VRF, enter the following command.
Brocade# clear ip rip local routes vrf blue
Syntax: clear ip rip local routes vrf vrf-name