Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) - Manual (Page 346)

322 Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide
53-1003031-02
show mpls ldp fec prefix A.B.C.D/y
2
Example
Brocade# show mpls ldp fec prefix 10.14.14.14/32
FEC_CB: 0x2d19811c, idx: 8, type: 2, pend_notif: None
State: current, Ingr: Yes, Egr: No, UM Dist. done: Yes
Prefix: 10.14.14.14/32
next_hop: 10.23.23.14, out_if: e2/1
Downstream mappings:
Local LDP ID Peer LDP ID Label State CB
10.12.12.12:0 10.14.14.14:0 3 Installed 0x2d14eb3c(-1)
Upstream mappings:
Local LDP ID Peer LDP ID Label CB
10.12.12.12:0 10.15.15.15:0 3 0x2d14f610(-1)
10.12.12.12:0 10.21.21.21:0 (f) -
History
Release Command history
Multi-Service NetIron Release 05.600 The prefix option is introduced to the show mpls ldp fec command. The
output of show mpls ldp fec prefix command is modified to indicate the
upstream mappings, which are filtered because of the action of peer or
global outbound FEC filter, as (f) instead of the label. (f) indicates that the
FEC is filtered and no label mapping is advertised to the given LDP peer.
Multi-Service NetIron Release 05.500 Command was introduced.
Related
commands
None.
Downstream Mappings Contents of the downstream mapping CB created as a result of the label mapping
received from the downstream LDP peer.
Local LDP ID Local LDP ID of the LDP session to which this downstream mapping CB belongs.
Peer LDP ID Remote LDP ID of the LDP session to which this downstream mapping CB belongs.
Label MPLS label received from the downstream LSR.
State State of label. Either installed or retained.
CB Memory address of the downstream mapping CB.
Command output Description